New Products

HYTORC LOADISC™

Lock & Load is about...
Hands-free, Precision, Speed Torquing of all Bolts in Seconds,

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

without the Hassle of... reaction arms, backup wrenches pullers, bridges, tommy bars jackscrews, impact- and hand wrenches

without the Nuisance of... torsion, side load, over-stretching, over-relaxing tool holding manual screw- or nut-turning

without the Danger of... pinching fingers being close to high powered tools

without the Cost of... two sets of tooling, for torque and tension longer bolts tons of accessories tool repair due to internal torsions

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

DISC and hex nut are of the same material and A/F size as regular nut.

Put the economical LOADISC™ on all Joints! LOCK on Tools. LOAD up bolts hands-free, torsion free with pure stretch!

The inexpensive HYTORC LOADISC™ has three purposes:

1. to stop the bolt from turning and twisting while the nut is being turned.
2. to allow locking the tool on the DISC for hands-free operation even on inverted applications.
3. to make torque faster and more precise.

The Result:

• Torque is torsion-, side load- and joint rotation-free without reaction arms and backup wrenches.
• Bolt Stretching is free of unknown transfer relaxation . No over-stretch. No slamming the nut face on to the joint face during load transfer. No risk of inadvertent yield stretching during loosening.
• With the known bearing face friction of the nut, Torque becomes more predictable and even.
• A single tool to make Torque and Tension as we know it - Profitable.

Data and Specifications

Size:
DISC:	Equivalent AF to heavy hex nut
NUT:	Round, across flat diameter (A&B)*
Height:	1.2 times bolt diam. combined (A) 1.5 times bolt diam. combined (B)
Travel; std:	1/8 of bolt diameter**

 

Tool:
XXI©:	Up to and incl. 2 1/2" bolt diam.
STEALTH©:	Up to and incl. 4" bolt diam.
AVANTI©:	Up to and incl. 7" bolt diam.

 

Material:
Standard:	DISC: H-2
Other:	B-16, 17-4 Stainless, Inconel

 

Other:

Hands-free tool operation is warranted.

* Hex or 12-point nut available
** more on request

All dimensions, torque and design parameters may vary without notice due to design improvements and no claims will be entertained in this regard.